Passat Sedan L4-2.0L Turbo (BPY) (2007)
Upper B-Pillar Trim
‹› Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.
Removal
-
Position seat as far forward as possible using fore/aft adjustment.
-
Remove airbag emblem - 1 -.
-
Insert a screwdriver - 2 - in opening and press clip downward - arrow A -.
-
Remove trim inward from B-pillar - arrow B -.
When removing headliner, the following work does not need to be done:
-
Remove sill molding - 1 - from catches in sill in front door area.
-
Loosen sill panel trim from mounts in area of B-pillar.
-
Remove sill panel trim from catches in door sill in front part of rear door area.
-
Thread seat belt - 2 - through slit in sill panel trim - 1 -.
-
Remove the bolt - 3 - (40 Nm) and remove belt anchor - 4 - from body.