Passat Sedan L4-2.0L Turbo (BPY) (2007)
Hydraulic Control Assembly - Antilock Brakes: Locations
ABS TRW (ABS/EDS/ASR/Esp)
ABS TRW (ABS/EDS/ASR/ESP)
1. ABS control module J104
It is not possible to separate control module and hydraulic unit.
2. ABS Hydraulic Unit N55
It is not possible to separate control module and hydraulic unit.
3. Brake line
^
To right front brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with thread M 10 x 1
^
Marked on hydraulic unit with "VR"
4. Brake line
^
To left rear brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with shorter thread M12 x 1
^
Marked on hydraulic unit with "HL"
5. Brake line
^
To right rear brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with thread M 10 x 1
^
Marked on hydraulic unit with "HR"
6. Brake line
^
To left front brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with shorter thread M12 x 1
^
Marked on hydraulic unit with "VL"
7. Brake line
^
Master brake cylinder/primary piston circuit to hydraulic control unit
^
Identification: Dia. 8.5 mm or dia. 6 mm and tube fitting with longer thread M12 x 1
^
Marked on hydraulic unit with "HZ1"
8. Brake line
^
Master brake cylinder/secondary piston circuit to hydraulic unit
^
Identification: Dia. 8.5 mm or dia. 6 mm and tube fitting with longer thread M12 x 1
^
Marked on hydraulic unit with "HZ2"