Passat Sedan L4-2.0L Turbo (BPY) (2007)
/Page-2447002.png)
-
Pull off parking brake motor from brake caliper.
-
Remove the seal.
Make sure that the ring groove of the seal and the contact surface of the parking brake motor do not become damaged.
-
Clean the ring groove and the contact surface of the parking brake motor.
Installing
-
Lightly coat the new gasket with brake fluid and then install it.
-
Turn the spindle back slightly the with help of a TORX(R) insert T45 - A -, until the parking brake motor can be correctly positioned.
