Volkswagen Workshop Service and Repair Manuals

-

Insert the coolant pump - 2 -.

‹› Installed position: Sealing plug in the housing points downward.

-

Install and tighten the coolant pump bolts - 1  -. 

-

Install the toothed belt, refer to one of the following:

=> [ Toothed Belt, with Divided Toothed Belt Guard ] See: Engine/Timing Components/Timing Belt/Service and Repair/Removal and
Replacement/Toothed Belt, With Divided Toothed Belt Guard.

=> [ Toothed Belt, without Divided Toothed Belt Guard ] See: Engine/Timing Components/Timing Belt/Service and Repair/Removal and
Replacement/Toothed Belt, Without Divided Toothed Belt Guard.

-

Fill the cooling system. Refer to => [ Draining and Filling ] See: Service and Repair/Procedures/Draining and Filling.

Tightening Specifications

1 Install using locking fluid