volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine/Fuel - MIL ON/DTC's DTC P0087/P1093/P2293|Page 4341 > < Engine/Fuel - MIL ON/DTC's DTC P0087/P1093/P2293|Page 4339
Page 3
background image

Inspect the tip of the high pressure fuel pump plunger for excessive wear.

Note:

If plunger tip of fuel pump is NOT WORN, DO NOT REPLACE the fuel pump.

If excessive wear is found the high pressure pump must also be replaced, see Group 20 Fuel Supply in ElsaWeb.

Tip:

High pressure fuel pump plunger damage is only possible if the cam follower base has a hole in it and the plunger tip has come in direct contact with the 
camshaft lobe.

If no excessive wear can be found in the high pressure fuel pump cam follower or intake camshaft lobe, or if the damage is found in camshafts with part
number 06F109101B, create a Technical Assistance Contact Ticket
under the Concern Type Engine and Engine Electronics in ElsaWeb.

If excessive wear of the cam follower is found an oil change should be performed on the vehicle following the repair.

Attach the complete diagnostic log to the contact, and call the VW Technical Assistance Center for further assistance.

Engine/Fuel - MIL ON/DTC's DTC P0087/P1093/P2293|Page 4341 > < Engine/Fuel - MIL ON/DTC's DTC P0087/P1093/P2293|Page 4339