Passat Sedan L4-2.0L Turbo (BPY) (2007)
-
Insert the coolant pump - 2 -.
‹› Installed position: Sealing plug in the housing points downward.
-
Install and tighten the coolant pump bolts - 1 -.
-
Install the toothed belt, refer to one of the following:
=> [ Toothed Belt, with Divided Toothed Belt Guard ] See: Timing Components/Timing Belt/Service and Repair/Removal and
Replacement/Toothed Belt, With Divided Toothed Belt Guard.
=> [ Toothed Belt, without Divided Toothed Belt Guard ] See: Timing Components/Timing Belt/Service and Repair/Removal and
Replacement/Toothed Belt, Without Divided Toothed Belt Guard.
-
Fill the cooling system. Refer to => [ Draining and Filling ] See: Cooling System/Service and Repair/Procedures/Draining and Filling.
Tightening Specifications
1 Install using locking fluid