Passat Sedan L4-2.0L Turbo (BPY) (2007)
Muffler: Service and Repair
Center and Rear Mufflers, Separating
‹› A separating point has been provided in the connecting pipe for removing, installing and individual replacement of the center or rear muffler.
‹› The separating point is marked by depressions around the circumference of the exhaust pipe.
Special tools, testers and auxiliary items required
‹› Body Repair Saw (V.A.G 1523 A)
‹› Chain Pipe Cutter (VAS 6254)
CAUTION!
To prevent injuries from metal shavings, wear protective goggles and protective clothing.
-
Cut the exhaust pipe at the separation point - arrow - using (V.A.G 1523 A) at a right angle.
-
Position the clamping sleeve at the side marks when installing.
-
When installing the double clamp, ensure that the bolt end - arrow - does not project over the lower edge of double clamp.
-
Align the exhaust system so that the distance - a - is equal on the right and left sides.