Passat Sedan L4-2.0L Turbo (BPY) (2007)
/Page-3052009.png)
-
Set shaft - C - so that connecting element of control motor - D - can be inserted.
-
Insert control motor with connecting element - D - into shaft - C - and mounts at intake housing - B -.
-
Install the bracket - A -, make sure the guides on the bracket - B - are inserted correctly into the intake housing mount - C - and that the bracket is
engaged correctly in both catches - D - and - E -.
-
Install all removed components in reversed order.
‹› After installing, function of recirculation door must be checked.
‹› Initiate "Basic Setting" function with Vehicle Diagnosis, Testing and Information System (VAS 5051B) (or succeeding model). Refer to => [
Climatronic A/C System, Checking and Adjusting Components ] See: Testing and Inspection/Component Tests and General
Diagnostics/Climatronic A/C System, Checking and Adjusting Components.
Fresh Air/Recirculating Air/Back Pressure Door Motor With Motor Position Sensor
Door Motors
Special tools, testers and auxiliary items required
‹› Vehicle diagnosis, testing and information system (VAS 5051B) or newer model.
Perform following work first:
-
Switch off all electrical consumers.
-
Switch off ignition.
