Passat Sedan L4-2.0L Turbo (BPY) (2007)
Fluid - M/T: Service and Repair
Transmission Fluid, Checking
Special tools, testers and auxiliary items required
‹› Torque Wrench (5-50 Nm) (V.A.G 1331)
‹› Triple Square Socket Driver (3357)
-
Remove the noise insulation.
-
Remove the oil fill plug - arrow -.
The oil level is correct when the transmission is filled up to the lower edge of the fill hole.
-
Install the plug - arrow - with a new seal.
-
Tighten the plug - arrow - to specification.
When filling, note the following:
-
Remove the plug - arrow -.
-
Top off the oil to the lower edge of the fill hole.
-
Install the plug - arrow - with a new seal.
-
Tighten the plug - arrow - to specification.
-
Install the noise insulation.
Different Versions of the Oil Fill and Oil Drain Plugs