Passat Sedan L4-2.0L Turbo (BPY) (2007)
lengths.
-
Pull the button - 3 - in direction of arrow and unlock the connector - 1 -.
-
Disconnect harness connector - 1 - in direction of arrow and remove pyrotechnic battery isolator - 2 - from vehicle.
‹› While doing this, observe safety precautions when working on pyrotechnic battery isolation system, refer to => [ Pyrotechnic Battery Isolator
Safety Precautions ] .
Installing:
Install in reverse order of removal, noting the following:
‹› When connecting harness connector to pyrotechnic battery isolator, make sure that connector lock engages audibly.
-
Tighten all threaded connections to specified torque, refer to => [ Fastener Tighten Specifications, Battery In Luggage Compartment ] .
-
Reconnect battery, refer to => [ Battery In Luggage Compartment, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service
and Repair/Removal and Replacement/Battery In Luggage Compartment, Disconnecting and Connecting.