Passat Sedan L4-2.0L Turbo (BPY) (2007)
/Page-1698004.png)
-
Hold the camshaft adjuster in front of the exhaust camshaft so that the notch - A - and pin - B - align.
-
Place the chain in this position onto the chain sprocket of the intake camshaft, first at the top - arrow -.
-
Slowly turn the intake camshaft using (T10020) in the - direction of arrow A - until the camshaft adjuster fits onto the camshaft.
‹› If the pin does not fit in the notch: remove and reinstall the chain.
-
Tighten the camshaft adjuster bolt to 20 Nm + an additional 45° (1/8) turn. To do so, use (T40080).
