Passat Sedan L4-2.0L Turbo (BPY) (2007)
Transmission Position Switch/Sensor: Service and Repair
Multi-Function Transmission Range Switch, Installing
Multi-Function Transmission Range Switch, Installing
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
Installation is in reverse order of removal. Pay attention to the following:
-
Connect multi-function switch - 4 - to shift rod - 6 -.
-
Hand-tighten securing bolts - 5 - for multi-function switch.
-
Bend hooks of locking washer - 2 - back.
-
Install washers - 2 - and - 3 - onto shift rod - 6 -.
-
Attach washer - 2 - with hooks facing upward.
-
Insert washer - 2 - with long and thin guides into long and narrow depressions in shift rod - 6 -.
-
Tighten nut - 1 - to 7 Nm.
-
Secure nut - 1 - by bending hooks of locking washer upward - 2 -.
-
Replace locking washer if hooks are broken off.
-
Attach lever - 3 - onto shift rod - 4 -.