Passat Sedan L4-2.0L Turbo (BPY) (2007)
-
Check wire between test box and 10-pin connector to Engine Control Module (ECM) for open circuit according to wiring diagram.
Terminal 2 + socket 27
Wire resistance: max. 3.0 Ohms
-
Check wire for short circuit to B+ and to Ground (GND).
Specified value: Infinity Ohms
-
Erase DTC memory of Engine Control Module (ECM).
-
Generate readiness code.
If no malfunction is detected in wiring and if voltage supply was OK:
-
Replace Fuel Pump (FP) Control Module -J538-.
-
Erase DTC memory of Engine Control Module (ECM).
-
Generate readiness code.