Passat Sedan L4-2.0L Turbo (BPY) (2007)
Hood Sensor/Switch (For Alarm): Service and Repair
Front Hood Switch (F266)
Removing:
-
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
-
Remove hood lock.
-
Disengage harness connector - 2 - and disconnect it.
-
Unclip wire retainer - 1 -.
-
Cut cable tie - 2 -.
-
Disengage retaining lug - 1 - and move the Front Hood Switch in the longitudinal holes so that it can be removed.
Installing:
Install in reverse order of removal.