Passat Sedan L4-2.0L Turbo (BPY) (2007)
Tow Sensor: Scan Tool Testing and Procedures
Towing Recognition Control Module (J345), Output Diagnostic Test Mode
Towing Recognition Control Module (J345), Output Diagnostic Test Mode
Special tools, testers and auxiliary items required
‹› Vehicle Diagnosis, Testing and Information System (VAS5051B)
‹› Power Outlet Tester (V.A.G 1537/A)*
‹› The Towing Recognition Control Module detects the use of a trailer only from a performance decrease of at least 5 W*.
‹› Use the (V.A.G 1537/A) for the test.
*
(V.A.G 1537/A) becomes too warm after a few minutes of use and switches off automatically. After a cooling off phase, (V.A.G 1537/A)
functions normally again.
-
Connect (V.A.G 1537/A).
-
Connect the (VAS5051B).
-
On the (VAS5051B), select "Guided Fault Finding".
-
Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:
‹› Body
‹› Body repair procedures
‹› 01 - OBD capable systems
‹› Towing sensor
‹› Functions
‹› Control Module for towing sensor - output Diagnostic Test Mode (DTM)
Transport Mode, Deactivating
03 - Service Procedures
Transport Mode, Deactivating
-
Connect the vehicle tester. Refer to => [ Tester, Connecting ]
-
Switch ignition on.
Indicated on display: