Passat Sedan L4-2.0L Turbo (BPY) (2007)
‹› Mounting tires with emergency running characteristics, refer to => [ Tire, with Run-Flat Tires ] See: Maintenance/Wheels and
Tires/Tires/Service and Repair/Tire, With Run-Flat Tires.
‹› Mounting tires, wheels with tire pressure monitoring system, refer to => [ Tire, with Tire Pressure Monitoring System ] See:
Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement.
6
Union Nut
‹› 8 Nm
7
Valve Cap
‹› Use only original valve caps from the repair set.
‹› Do not use Comfort valve caps and metal caps.
Tire, With Tire Pressure Monitoring System
Tire, with Tire Pressure Monitoring System
Tire, Pressing Off
CAUTION!
‹› Pay attention to the safety precautions and conditions. Refer to => [ Tire Pressure Monitoring System Safety Precautions ] See:
Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Service Precautions.
-
Release air from tires, unscrew the nickel-coated valve insert to do so.
-
When pressing off tire on a tire dismounting/mounting machine with press-off blade, always make sure that tire valve/tire pressure sensor - arrow
- is located opposite the press-off blade - 1 -.
Press-off blade must be applied at maximum 2 cm removed from rim flange.
-
Remove balancing weights and coarse dirt from disc wheel.
-
Press off both tire beads around circumference while thoroughly applying tire mounting paste between tire and rim flange - arrow -.