Passat Sedan L4-2.0L Turbo (BPY) (2007)
/Page-2128002.png)
-
Check resistances of solenoid valves at connector to the solenoid valves:
NOTE: Resistance value is valid at approx. 20 degrees C. At higher temperatures, resistance value increases.
If one of the specified values is not obtained:
-
Replace the relevant solenoid valve.
-
Erase DTC memory of Transmission Control Module (TCM).
-
Generate readiness code.
If specified values are obtained:
-
Check wires to Transmission Control Module (TCM) according to wiring diagram.
Checking wires to Transmission Control Module (TCM)
-
Connect test box to control module wiring harness. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Component Tests and General Diagnostics/Component Tests (VAG Code Tests)/Test Box, Connecting For Wiring Test
-
Check wires between test box and 14-pin connector to Transmission Control Module (TCM) for open circuit according to wiring diagram. Wire
resistance: max. 3.0 Ohms
