Passat Sedan L4-2.0L Turbo (BPY) (2007)
‹› Spacer length = approximately 40 mm (for example, 1/2 inch socket)
-
Install the master cylinder into the mounting bracket - arrow 1 - and - arrow 2 -.
-
Press the master cylinder operating rod - 1 - in the - direction of the arrow - until the mount - 2 - engages audibly to the clutch pedal.
-
Install the mounting bracket, refer to one of the following:
Eos, refer to => [ Mounting Bracket ]. See: Clutch Hydraulic System/Service and Repair/Removal and Replacement/Clutch Pedal and
Hydraulics/Mounting Bracket
Passat, Passat CC and CC, refer to => [ Mounting Bracket ]. See: Clutch Hydraulic System/Service and Repair/Removal and Replacement/Clutch
Pedal and Hydraulics/Mounting Bracket
Clutch Position Sensor
Clutch Pedal and Hydraulics
Clutch Position Sensor