Passat Sedan L4-2.0L Turbo (BPY) (2007)
A Support, for example, (22/2)
B Internal puller 46 to 58 mm, for example, (21/7)
Pressing in Tapered Roller Bearing Outer Race into Transmission Housing
-
Support transmission housing directly beneath the bearing mount using the (3345).
Removing and Installing Roll Pin for Differential Bevel Gear Axle
Removing
-
Cover inner race/tapered roller bearing in order to prevent possible damage and entry of shavings.
-
Drive out spring pin with chisel, inserting chisel into circumferential groove.
Installing
-
Drive into the differential housing up to the stop.
Installing the Differential Bevel Gears
-
Insert thrust washer union with transmission fluid.
-
Install and secure both large differential planetary gears, for example, with a flange shaft.