Passat Sedan L4-2.0L Turbo (BPY) (2007)
-
Insert the spring so that the leg - A - contacts the upper part of the pin - arrow -.
-
Then pull the leg - B - far enough downward so that it rests on the underside of the pin - arrow -.
Shift Lever and Housing, from 11.06
‹› Lubricate the bearing areas and the sliding surfaces.
‹› Shift mechanism, disassembling and assembling. Refer to => [ Shift Mechanism, from 11.06 ] See: Service and Repair/Overhaul/Shift Mechanism,
From 11.06.
1
Base Plate