Volkswagen Workshop Service and Repair Manuals

Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor

Transmission Output Speed Sensor

Removing

-

Remove valve body => [ Valve Body, Removing ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.

-

Remove bolt - 2 - from Transmission Output Speed (RPM) Sensor (G195).

-

Remove sensor from transmission.

Installing

Installation is in reverse order of removal. Pay attention to the following:

-

Press sensor into transmission until stop.

-

Tighten bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195), tightening torque => [ Valve Body Tightening Specifications ] See:
Automatic Transmission/Transaxle/Valve Body/Specifications/Valve Body Tightening Specifications - Gears, Hydraulic Controls. 

-

Install valve body => [ Valve Body, Installing ] See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Valve Body.

Torque specifications => [ Valve Body Tightening Specifications ] See: Automatic Transmission/Transaxle/Valve Body/Specifications/Valve Body
Tightening Specifications - Gears, Hydraulic Controls