Passat Sedan L4-2.0L Turbo (BPY) (2007)
Wiper Arm: Removal and Replacement
Rear Window Wiper Arm
Rear Window Wiper Arm
-
Switch rear window wipers on and off again with ignition on in order to drive wiper arm into rest position.
-
Fold cover cap - 1 - of rear window wiper up and unclip it.
-
Loosen hex nut (SW 13) - arrow -, without completely removing.
‹› Aero-wiper blades are very flexible. Grasp wiper blade only in area of wiper blade mount to lift them off rear window.
-
Fold up wiper arm and remove from cone moving it sideways.
-
Remove the hex nut - arrow - and remove wiper arm.
Installing
-
Switch rear window wipers on and off again with ignition on in order to drive wiper motor into rest position.
-
Insert wiper arm on wiper arm shaft at approximate rest position and hand-tighten nut - arrow -.
-
Set rest position of rear window wiper, refer to => [ Rear Window Wiper Blade Park Position, Adjusting ] See: Adjustments/Rear Window Wiper
Blade Park Position, Adjusting.
Wiper Arms