Passat Sedan V6-2.8L (ATQ) (2000)
Trunk / Liftgate Motor: Service and Repair
Rear Lid Unlock Motor -V53- - Sedan From 10.00, Removing And Installing
Rear lid lock carrier, removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Remove screws -arrows A-, unclip trim -arrows B- and remove trim.
-
Disconnect electrical connections -1-, -2- and -3-.
-
Unclip cable at lock assembly.
-
Remove hex nuts -arrows- and remove lock carrier.
Rear lid unlock motor, removing
-
Remove mounting screws for motor -3-, remove motor and unclip cable -1-.
Installing
Install in reverse order of removal.