volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Generic Scan Tool|Page 5160 > < With Generic Scan Tool|Page 5158
Page 3
background image

-

Check wire between terminal 2 of relay carrier (arrow) and terminal 2 of 2-pin connector of Secondary Air Injection (AIR) Pump Motor for open
circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohms

-

Also check the wire for short circuit to B+ or Ground (GND).
Specified value: Infinity Ohms

-

Check wire between 2-pin connector terminal 1 and Ground (GND) for open circuit according to wiring diagram.
Wire resistance: max: 1.5 Ohms

If no malfunctions are found in wires:

-

Replace Motronic Engine Control Module (ECM) -J220-.

With Generic Scan Tool|Page 5160 > < With Generic Scan Tool|Page 5158