Passat Sedan V6-2.8L (ATQ) (2000)
^
All threaded holes and wheel bearing/wheel hub contact surfaces are to be free of paint and dirt
11. Bolt
^
120 Nm (89 ft. lbs.) and turn 90° further
^
M 14x 1.5x 190
^
Always replace each time after removing
12. Retaining strap
^
For stabilizer bar
13. Threads in longitudinal member
Installing stabilizer bar retaining strap
-
Insert retaining strap -1- behind the wheel speed sensor retainer -2- on axle beam .
-
Place retaining strap around stabilizer bar -3- and close strap.
-
Push stabilizer bar approx. 8 mm toward axle beam and tighten retaining strap as far as possible.