Passat Sedan V6-2.8L (ATQ) (2000)
Clutch: Service and Repair
Reverse Gear Clutch -K2-
Reverse gear clutch -K2- disassembling and assembling
Only when cleaning or during visual inspection must clutch be disassembled.
During these procedures ensure ball valve (arrow) is not damaged.
1. Circlip
^
Mark when removing and reinstall in same position
2. Thrust plate
^
Smooth side faces inner plates
3. Inner plate
^
Quantity See: Specifications
4. Outer plate
^
Quantity See: Specifications
5. Corrugated washer
6. Circlip
^
Removing and installing; see Fig. 1
^
Installation position; see Fig. 2
7. Spring supporting plate
^
With springs
^
Installation position; see Fig. 2
8. Spring supporting ring
9. Piston
^
Sealing lips are vulcanized to piston
^
Moisten sealing lips with ATF before installing
^
Turn piston slightly when installing
10. Clutch housing