Passat Sedan V6-2.8L (ATQ) (2000)
^
Installing; see Fig. 4
13. Piston ring
-
Check that it is correctly located; see Fig. 2
^
Installing; see Fig. 3
Fig. 1 Circlip (arrow), removing and installing
-
Press piston cap down carefully until circlip can be removed or installed.
Fig. 2 Seating of piston rings, checking
-
Ensure ends of piston rings are connected together.
Fig. 3 Piston ring, installing and connecting ends together
-
Place piston ring in groove.
-
To hook ends together press sides of ring in and guide ends over one another.
-
Do not twist piston ring out of groove on one side.
Fig. 4 O-ring, installing
-
Insert O-ring (arrow) in turbine shaft recess.