Passat Sedan V6-2.8L (ATQ) (2000)
Planetary Gears: Adjustments
Planet Carrier, Adjusting
-
When adjusting planet carrier install components in transmission housing without shim (item18).
1. Input gear
^
Do not remove to adjust the planet carrier
^
Removing and installing input gear or axial needle bearing for planet carrier.
2. Axial needle bearing washer
^
Insert smooth side in input gear
3. Axial needle bearing
4. Axial needle bearing washer
5. O-ring
^
Insert in planet carrier
6. Planet carrier
7. Transmission housing
^
With input gear and axial needle bearing
^
Axial needle bearing remains in input gear
^
If axial needle bearing is damaged
8. Small sun gear
^
Can only be taken out of planet carrier on transmission "DFG"
9. Washer
10. Axial needle bearing
11. Large sun gear
12. Washer
^
Insert into large sun gear, Transmission, assembling See: Service and Repair
13. Axial needle bearing
14. Large axle shaft
15. Axial needle bearing
16. Needle bearing
17. Small axle shaft
18. Shim
^
Do not install in planet carrier when adjusting
19. Washer
20. Small axle shaft bolt
^
30 Nm (22 ft. lbs.)