Passat Sedan V6-2.8L (ATQ) (2000)
/Page-1564002.png)
^
Pressing off; see Fig. 8
^
Pressing on; see Fig. 13
13. Circlip
^
Installation position; see Fig. 11 item 4
^
Thickness must be remeasured when replacing synchronizer hub Fig. 12
14. 3rd and 4th gear operating sleeve
^
Installation position; see Fig. 14
15. 4th gear synchronizer ring
^
Checking for wear; see Fig. 10
16. Spring
^
Insert in 4th gear; see Fig. 9
^
Application
17. 4th gear
18. Needle bearing
^
For 4th gear
19. 5th gear
^
Pressing off; see Fig. 7
^
Pressing on; see Fig. 15
20. Circlip
^
Installation position; see Fig. 11, item 5
^
Re-determine thickness when replacing 5th gear; see Fig. 12
21. Needle bearing
^
Always replace (damaged during removal)
^
Pulling out; see Fig. 4
^
Installation position; see Fig. 5
^
^Driving In; see Fig. 6
22. Plastic sleeve
23. Transmission cover
Fig. 1 Driving-out needle bearing.
Fig. 2 Pressed-in depth for needle bearing
Dimension -a- from lower edge of straight-edge to upper edge of bearing: 39.5 mm (1.555 inch)
