Passat Sedan V6-2771cc 2.8L DOHC (AHA) (1998)
Trunk / Liftgate Lock Cylinder: Service and Repair
Lock Cylinder Carrier, Removing and Installing
Lock Cylinder Carrier, Removing And Installing
Removing
-
Remove trim for trunk lid.
-
Disconnect harness connectors - arrows -.
-
Unclip operating rod - 2 - for lid lock.
-
Remove nuts - 1 -.
-
Remove securing clamp in direction of - arrow - counter clockwise using a screwdriver and hold it in position.
-
Remove lock cylinder carrier - 1 - from lid and thereby from grip piece.
-
Lock cylinder can now be removed from carrier.
Installing
-
Engage locking clamp again.
-
Insert lock cylinder into carrier.
-
Install complete carrier onto handle trim and threaded pins, and engage into handle trim with an audible click.