Passat Sedan V6-2771cc 2.8L DOHC (AHA) (1998)
-
Connect multimeter between harness connector terminals 1 and 2 (to ECM), using VW1594 connector test kit.
-
Start engine and run at idle.
-
Measure voltage supply and check display in display group 40, display field 2.
If display = Htg.bC.ON:
-
Specified value: 11.0-14.5 volts
If display switches between "Htg.bC.ON" and "Htg.bC.OFF":
-
Specified value: between 0.0-12.0 volts (oscillating)
-
Switch ignition off.
If there is no voltage:
-
Connect VAG1598/22 test box to ECM harness connector.