Passat Sedan V6-2771cc 2.8L DOHC (AHA) (1998)
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Switch ignition off.
-
Check readiness code. If Diagnostic Trouble Code (DTC) memory has been erased, or ECM was disconnected, generate new readiness code.
Refer to "Monitors, Trips and/or Drive Cycle (Readiness Code)/Checking, Readiness Code",under "Engine" See: Computers and Control
Systems/Testing and Inspection
Refer to "Monitors, Trips and/or Drive Cycle (Readiness Code)/Generating, Readiness Code" under "Engine" See: Computers and Control
Systems/Testing and Inspection
Explanation of 4-digit display in display field 4, display group 56
Continuation
If the specification is not attained:
If the display does not change:
-
Connect VAG1598/22 test box to ECM harness connector.