Passat Sedan V6-2771cc 2.8L DOHC (AHA) (1998)
Valve Body: Service and Repair
01V Automatic Transmission
Valve Body, Removing And Installing
WARNING; Do not run engine or tow vehicle with oil pan removed or when there is no ATF in transmission.
^
Valve body can be removed with transmission in vehicle.
^
Lubricate O-rings with ATF when installing.
^
Always replace a valve body that is contaminated or malfunctioning.
^
Do not use fluffy (lint) cloths.
^
After re-installing the oil pan, fill with ATF.
1. Drain plug
^
40 Nm (30 ft. lbs.)
^
Remove plug to drain ATF.
2. Sealing ring
^
Always replace
3. Bolt
^
10 Nm (7 ft. lbs.)
^
Tighten oil pan bolts in stages and diagonally
4. Oil pan
5. Gasket
^
Always replace
6. ATF screen
^
Removing and installing
7. Bolt
^
8 Nm (71 inch lbs.)
^
Bolts securing valve body:
1 bolt M6 x 30;
16 bolts M6 x 60
^
Removing and installing
^
Observe correct tightening sequence
8. Valve body
^
Select correct version according to transmission code
^
Removing and installing