Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
Rear Door Window Regulator: Service and Repair
Assembly Overview
Rear Door assembly
Refer to the image as a guide during disassembly and assembly
1. Door
Removing and installing. Refer to Door See: Front Door/Service and Repair
Adjusting: at hinge within oversized holes
2. Inner window channel
Pushed onto flange
3. Door window glass
Removing and installing. Refer to
Rail at door window, installation dimension. Refer to See: Windows and Glass/Windows/Window Track/Service and Repair
4. Outer window channel
Buttoned into window frame
Cannot be removed without destroying
Removing and installing. Refer to See: Windows and Glass/Windows/Window Track/Service and Repair
5. Trim
6. Screw
7 Nm (162 in. lb)
7. Window channel
Pull up and out of window slot
8. Window regulator
Removing and installing. Refer to See: Window Regulator Removal
Installing glass on window regulator. Refer to
9. Catch pin
10. Clip
Two-part