Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
Brake Caliper: Service and Repair
Overhaul
Front
Exploded View Of Teves/ATE Front Caliper
Component Notes And Information
NOTE:
^
During removal and installation procedures, refer to the component location illustration above and component notes below.
^
When repairing, apply a thin coat of brake fluid to cylinders, pistons and seals. Install all parts in repair kit
^
During removal and installation procedures, refer to the component location illustration above and component notes below
1
Protective seal
-
Push onto bleed valve
2
Bleed valve
-
Apply thin coat of brake cylinder paste to threads before threading in
3
Cap
-
Install in mounting bushing
4
Guide pin
-
Tighten to: 25 Nm (18 ft lb)
5
Mounting bushing
-
Insert into brake caliper housing
6
Brake cylinder housing
7
Brake carrier
-
Install on brake caliper housing
8
Retaining spring
-
Install with both ends in the drillings in brake caliper housing
9
Piston seal
-
Remove using a screwdriver
10
Piston
-
Force piston out of brake caliper using compressed air
-
First coat the piston lightly with brake cylinder paste.
-
Piston diameter 54 mm
11
Protective seal
-
Do not damage when installing piston
Removal