Replace Intake and Exhaust Valves in Passat V6-2792cc Engine (1995)
-
Maximum runout: 0.01 mm (0.0004 inch)
Trigger Wheel (5)
-
For Camshaft Position (CMP) Sensor.
-
When installing, contact surfaces must be dry.
Camshaft Sprocket Bolt (6)
-
Tighten to: 100 Nm (74 ft. lbs.).
-
Counter hold with a suitable 22 mm wrench on camshafts when removing or installing.
-
Oil contact surface when installing.
Cylinder Head Deck Height (7)
-
Dimension a, minimum: 139.5 mm (5.4963 inch).
Valves (9)
-
Do not rework, only lapping is permitted.
Valve Guide (10)
-
Replacement guides have a collar.
Hydraulic Lifter (15)
-
Do not interchange used lifters.
-
Store with camshaft contact surfaces down.
-
Oil contact surfaces.
-
Remove prior to checking camshaft axial clearence