Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
Heater Core Case: Service and Repair
Disassembly and Assembly
Without A/C
Heater, Disassembling And Assembling
The air distribution housing and its components. The fresh-air blower can be reached by removing the glovebox.
Virtually any other work on components of the air distribution housing, including the heater core or the A/C evaporator, requires discharging the A/C
system, draining the engine coolant, and removing the instrument panel.See: Body and Frame/Interior Moulding / Trim/Instrument Panel/Dash
Board/Service and Repair
1 - Gasket
2 - Heat exchanger
-
Gasket must be glued all around and free of gaps.
-
If catches do not engage, secure heat exchanger with screws.
3 - Air distributor
-
Do not disassemble further.
4 - Clamp
5 - Main shut-off flap
-
Only in vehicles without A/C
6 - Air duct with main shut-off flap
-
Do not disassemble further.