Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
Air Bag Control Module: Service and Repair
Removal and Installation
NOTE: Disconnect battery Ground strap before removing the control module.
-
Remove handle and trim for parking brake.
-
Remove center console and extension.
-
Remove footwell air outlet.
-
If necessary make a cut in the carpeting and soundproofing mats in the area of the control module bracket.
-
Push retaining tab -4-, move bracket -5- (arrow) and disconnect connector -3- from control module -1-.
-
Remove nuts -2- and remove control module with bracket off the studs.
^
Tightening torque: 20 Nm (15 ft lb)