Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
Fig. 2
Fig. 2 Installing valve body
- Route conductor strip as illustrated.
When installing do not kink or twist
Fig. 3
Fig. 3 Adjusting operating rod for manual selector valve
- Move selector shaft to position "P"
- Push operating rod with manual selector valve into valve body as far as stop (in direction of arrow) and tighten bolt
Tightening torque: 4 Nm (35 in lb)
Note:
- The manual selector valve must always be resting against the stop. Counter-hold in direction of arrow when tightening bolt
- Always replace manual selector valve bolt
Fig. 4
Fig. 4 Installing ATF screen
- Press gasket into ATF screen before installing screen