Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
-
Apply brakes (second person necessary).
CAUTION!
Lower vehicle if necessary, but not far enough to let the wheels touch the ground or the wheel bearing will be damaged.
-
Tighten 12-point nut to 200 Nm (148 ft.lb), then loosen one turn.
-
Tighten 12-point nut to 50 Nm (37 ft.lb).
-
Mark 12-point nut with a line at one of points -arrow A-.
-
Mark a second line on edge of wheel hub above next point on nut -arrow B-.
Note:
The distance from one point to the next on the 12-point nut is equivalent to 30°.
-
Tighten 12-point nut further until marked points align.