Passat Sedan V6-2792cc 2.8L DOHC (AAA) (1995)
-
Gap a = New: 1.0-1.7 mm (0.039-0.067 in)
Wear limit: 0.5 mm (0.020 in)
(26) Operating sleeve with synchronizer hub (synchro-hub)
-
For 3rd gear (3GR) and 4th gear (4GR)
-
Press off with 2nd gear and 3rd gear
DIsassembling And Assembling 3rd Gear (3GR) And 4th Gear (4GR) Operating Sleeve And Synchro-hub
-
1 Spring
-
2 Locking piece
-
3 Operating sleeve
-
4 Synchro-hub
-
Slide operating sleeve over synchro-hub
-
Recesses for locking pieces, in synchro-hub and in operating sleeve, must be aligned
Assembling 3rd Gear (3GR) And 4th Gear (4GR) Operating Sleeve And Synchro-hub
-
Operating sleeve installed over synchro-hub
-
Insert locking pieces and install springs
-
Spring ends must be offset by 120°
-
Bent end of spring must engage in locking piece
Pressing On 3rd Gear (3GR) And 4th Gear (4GR) Operating Sleeve And Synchro-hub With Operating Sleeve
(27) Sleeve for needle roller bearing