Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
Water Pump: Service and Repair
LEGEND
1
Coolant (Water) Pump Pulley Bolt
2
Coolant (Water) Pump Pulley
3
Coolant (Water) Pump Bolt
4
Coolant (Water) Pump
5
O-Ring
6
Throttle Body
7
From Cylinder Head
8
Continued Coolant Circulation Pump
9
Electrical Connector
10
Retaining Clip
11
Engine Coolant Temperature (ECT) Sensor
12
From Heat Exchanger
13
To Heat Exchanger
14
Cap
15
Cover
16
Bolt/Screw
17
Expansion Tank
18
Upper Coolant Hose
19
Lower Coolant Hose
20
Automatic Transmission Fluid (ATF) Cooler
21
Thermostat Housing
22
Coolant Hose
23
Engine Oil Cooler
24
To Cylinder Block
25
Coolant Drain Screw
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Coolant (Water) Pump Pulley Bolt (1)
-
Tighten to: 25 Nm (18 ft. lbs.).
-
To loosen, use modified holding wrench tool No. VAG 1590, or equivalent.
Coolant (Water) Pump Bolt (3)
-
Tighten to: 20 Nm (15 ft. lbs.).