Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
Ignition Switch Lock Cylinder: Service and Repair
STEERING COLUMN INGNITON SWITCH REPLACING
Removal
1 -
Driver air bag
- See: Restraint Systems/Air Bag Systems/Air Bag
2 -
Hex nut
- 40 Nm (29 ft lb)
3 -
Steering wheel with coil spring for air bag
4 -
Steering column switch securing screws
5 -
Switch for turn signals, cruise control system, high and low beam head light, flasher and emergency light switch
- See Figure 2 below.
6 -
Switch for windshield wiper and wipe/wash operation
- See Figure 2 below.
7 -
Column tube
8 -
Steering column
9 -
Support ring
10 -
Steering column lock housing securing bolt
- 10 Nm (7 ft lb)
11 -
Steering lock housing
- See Figure 3 below.
12 -
Ignition/starter switch.
- Remove steering lock housing.
- See Figure 3 below.
- Remove securing screws
13 -
Contact ring
14 -
Lock cylinder
- See Figure 4 below.
15 -
Spring
16 -
Clamping washer
Figure 2
Turn signal and windsheild wiper switch, removing