Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
Press pliers together with slight pressure on the sealing ring
Pry out sealing ring and O-ring A- Needle nose pliers (standard commercial)
1
Toothed rod with piston
2
Sealing rod
3
O-ring
Sealing rings, installing on toothed rod piston
Slide mounting sleeve on toothed rod
Pull O-ring over tool and install in groove of piston
Lubricate sealing ring with hydraulic oil, pull over tool and install in groove of piston
Power steering gear assembling
NOTE: All sealing rings should be lubricated with hydraulic oil before installing.
Sealing Ring
Check whether the valve body housing -2- is absolutely clean on the inside, otherwise clean
Place sealing ring -1- on tool. The sealing lip -arrow- points toward tool
Drive sealing ring into stop
1
Sealing ring
Insure correct installation position of sealing ring in valve body