Passat Sedan V6-3.6L (BLV) (2008)
Fuel Door Release Actuator: Service and Repair
Fuel Filler Door Unit
=> [ Fuel Filler Door Unit ]
=> [ Actuator ]
Fuel Filler Door Unit
Removing
‹› The description applies also to the fuel filler door unit with a natural gas filler tube.
-
Remove the tank cap.
-
Remove the bolt - 2 -.
-
Fold back boot from tank filler neck.
-
Pull tank flap unit - 1 - with drain hose - 3 - toward rear out of retainers and swivel tank flap unit - 1 - out of side panel.
-
Unclip assembly piece - 4 - from side panel and pull off assembly piece from release rod - 5 -.
Installation