Passat Sedan V6-3.6L (BLV) (2008)
Hood Insulator / Pad: Service and Repair
Insulation
Hood
Insulation
Removing
-
Support the hood - 4 -.
-
Remove the gas-filled strut - 3 - from the hood - 4 -. Refer to=> [ Gas Strut ] See: Service and Repair/Hood/Gas Strut
-
Pry the clips - 1 - out of the insulation - 2 -. Use pry lever (80-200),
-
Pull insulation - 2 - out of longitudinal holes.
Installation