Passat Sedan V6-3.6L (BLV) (2008)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Rear Lid Trim
Rear Lid Trim
Rear Lid Trim
Removal
-
Remove warning triangle bracket. Refer to => [ Warning Triangle Bracket ] See: Warning Triangle Bracket
-
Remove 4 screws - 1 - in grip recesses (1.5 Nm).
‹› In addition to the four screws, the trim is secured all around to rear lid with ten metal clips - arrows -.
-
Pull trim up slightly and press metal clips - arrows - all around with a screwdriver out of mounts in rear lid.
-
Disengage rear lid emergency release from rear lid lock.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Before installing, check metal clips for damage and replace if necessary.