Passat Sedan V6-3.6L (BLV) (2008)
Scuff Plate: Service and Repair
Sill Panel Trim
=> [ Sill Panel Trim ]
=> [ Wheel Housing Trim ]
Sill Panel Trim
Removal
Sedan/Passat CC
-
Remove seat bench. Refer to => [ Seat Bench ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats.
Wagon
-
Fold the bench seat forward.
All vehicles
-
Remove side upholstery:
‹› with rear side airbags, refer to => [ Side Upholstery with Side Airbag ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats
‹› without rear side airbags, refer to => [ Side Upholstery without Side Airbag ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats
-
Remove wheel housing trim. Refer to => [ Wheel Housing Trim ].
‹› To provide a better illustration, the front seat is not shown in the illustration.
-
Remove the two bolts - 1 -.
-
Remove sill molding - 2 - from catches in sill in front door area.
-
Loosen sill panel trim from mounts in front area of B-pillar.
-
Remove sill panel trim from catches in door sill in rear door area.
-
Thread seat belt - 3 - through the slot in sill panel - 2 -.