Passat Sedan V6-3.6L (BLV) (2008)
Lock Carrier Cover
Removal
-
Slide floor carpet forward and remove cover of vehicle tool kit mount.
‹› Neighboring components, for example, rear bumper are not depicted in the following illustration.
-
Remove the two bolts - 1 - (1.5 Nm).
-
Remove lock carrier cover - 2 - upward out of lock carrier.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Before installing, check metal clips for damage and replace if necessary.
Luggage Compartment Liner, Wagon
Luggage Compartment Trim
Luggage Compartment Liner
Removal
-
Fold the two rear elements - 1 - of lining forward and unscrew two bolts - 2 - (1.5 Nm).
-
Remove lining - 3 - from vehicle.