Passat Sedan V6-3.6L (BLV) (2008)
-
Remove the two bolts - 1 - (6 Nm) and remove the anchor point - 2 -.
-
Remove the three bolts - 3 - (1.5 Nm).
-
Remove screw - 4 - (1.5 Nm) and remove hook - 5 -.
-
Remove the four press buttons - arrows - using (T10236) and remove trim from mounts in vehicle.
Installation
-
To install, perform the steps used for removal in reverse order.
‹› Before installing, check press buttons for damage and replace if necessary.
Right Luggage Compartment Side Trim, Sedan
Luggage Compartment Trim
Right Luggage Compartment Side Trim
Removal
-
Switch off ignition.
-
Remove floor covering from vehicle.
-
Remove spare wheel from vehicle.
-
Remove vehicle tool kit mount from vehicle.